Kodak i150 and i160

FORMS

INVOICES

Comments

Add this line in the [ScannerDefs] section in Ehglobal.ini/Eiglobal.ini:
Scanner87=87, Kodak i1XX , 14592, -1, 5, 0, 1, 100, 100, 100, 1, 8, 10, EKI100, 1
(Starting with FORMS 5-2 ServicePack 11 and INVOICES 5-3 ServicePack 4, this step is unnecssary.)

Kodak's Scanner Validation Tool is required.

Set UseMiniDriver and BrightnessAuto to 1 in E*local.ini.
See details regarding JPEG export.

Warning: Do not attempt to install i100 ISIS driver on Windows NT! Windows NT does not support the FireWire connection.

Maximum paper size

A3

 A3

Simplex black & white scanning speed with
FORMS (200 DPI) and INVOICES (300 DPI)

30 pages/minute

22 pages/minute

Simplex color scanning speed with
FORMS and INVOICES (both 150 DPI)

40 pages/minute

26 pages/minute

Duplex black & white scanning speed with
FORMS (200 DPI) and INVOICES (300 DPI)

30 pages/minute (i160)

16 pages/minute (i160)

Note: Duplex scanning speed (300 DPI) is reduced to about 10 pages/minute if the paper size is set to A3 in the Scanner settings dialog, even if the actual page size is A4.

Duplex color scanning speed with
FORMS and INVOICES (both 150 DPI)

 40 pages/minute (i160)

25 pages/minute (i160)

Output formats

Black & white, grayscale, color

Image enhancement

PerfectPage + iThresholding
To enable iThresholding, set BrightnessAuto=1 in E*local.ini.

Auto crop

Supported – set UseMiniDriver=1

Deskew

Supported

ColorDropOut

Double feed detection

Ultrasonic supported – select Thickness in the Scanner settings dialog
(Selecting both Thickness and Length does not work.)

Endorser

Not available

Patch reader

Not available

Scanner firmware (the test unit)

1.0.12

Interface

FireWire (not SCSI). FireWire card included with the scanner.
Version of Scanner Validation Tool (SVT) used for certification: 5.18.

ISIS driver used for certification

1.1.10410.5001

Certified from version

5-2 SP9

5-3 SP3 

Operating system used for cert.*

Windows 2000

Windows 2000 

Certification date (YYMM)

0404

0404

Useful INI flags

Set UseMiniDriver=1 and BrigthnessAuto=1 in the [SCSIOptions] section of Ehlocal.ini.

Set UseMiniDriver=1 and BrigthnessAuto=1 in the [SCSIOptions] section of Eilocal.ini.